Hitches - Pintle or Clevis styles available
Tongue - Extra long tongue
Replaceable Axles
Leveling - Holes are notched for adjustability.
Tilt
Side Wear Edges
Lift
Jack Stand
Built-in Jack storage to avoid jack damage
| Premium Drag Scrapers | |
|
|
|
|
Hitches - Pintle or Clevis styles available |
|
|
|
The hitch comes with 4 height adjustments. This allows you to keep the scraper level with the ground with most models of tractors. |
|
Tongue - Extra long tongue |
|
|
|
Stop chewing up your tires on the sharp turns, the tongue is a full ten feet from the hitch to the front of the box giving you plenty of clearance for tight corners. |
|
Replaceable Axles |
|
|
|
Axles are held in with a bolt instead of welded which makes it easy to replace the axles. |
|
Leveling - Holes are notched for adjustability. |
|
|
|
Hinged from the outside for more stabilty and even down pressure Free moving Hinge point for greater stability. |
|
Tilt |
|
|
|
The scraper tilts both left and right. However most of the time people will dig with the right side of the scraper, which is why the cylinder is placed on the right hand side of the scraper. This means the scraper will tilt with less effort to the right but it can also tilt to the left. |
|
Side Wear Edges |
|
|
|
Side wear edges help control your digging depth. The edges have 4 inches of adjustment to account for wear and depth control |
|
Lift |
|
|
|
The scraper will lift approximately 24 inches off the ground depending on hitch arrangement |
|
Jack Stand |
|
|
|
Built-in Jack storage to avoid jack damage |